This Tech Tip demonstrates how to connect a computer to the NEC SL2100 or NEC SL1100 phone system, in order to make programming changes. We’ll cover both PCPro and WebPro examples.
This Tech Tip demonstrates how to set the the time and date on the NEC SL2100 or NEC SL1100 phone system, using the phone key pad. Any MLT phone can be used to complete these steps, including the 12 or 24 button digital or IP phones.
This Tech Tip demonstrates how to set an incoming trunk to ring a specific extension on the NEC SL2100 or NEC SL1100 phone system. You can control which specific trunk rings the desired extension.
This Tech Tip demonstrates how both the NEC SL2100and NEC SL1100 phone systems can be conveniently programmed from a remote location via the PCPro Software.
The software firmware version, MAC address and hardware key code are important pieces of information. This Tech Tip demonstrates how they can be easily located using any phone.
This Tech Tip demonstrates how to locate the System IP Address and VoIP Daughterboard IP Address from any phone, and update the addresses using the NEC PCPro Programming Software. This tip applies to both the NEC SL2100 and NEC SL1100 phone systems.
Automatic Trunk Line Seizure means that a phone line is automatically grabbed when the phone handset is lifted. This can be set using the PCPro Programming Software for both the NEC SL2100 and NEC SL1100 phone system.
This Tech Tip demonstrates how to set up a personal line, in which a CO Phone Line rings only one specific extension.
This Tech Tip demonstrates how to make a specific extension (station) not ring, when a call comes in to the NEC SL2100 or NEC SL1100
Sometimes a single user will need their own outbound Caller ID – for instance, if the user has their own private DID. This Tech Tip will demonstrate how to change a displayed caller id number on an outbound call made from the NEC SL1200 or NEC SL1100. (Digital extensions only)